Skip to content
TRAK TOOLROOM Kneemill
TRAK toolroom mills are equipped with the easiest to use control on the market – the ProtoTRAK CNC.
The ProtoTRAK CNC is designed specifically for prototype, one-off and small lot machining. All TRAK toolroom mills can operate manually with DRO, or 2 or 3 axis CNC.
| Specification | K3KMX | K3RMX |
|---|---|---|
| Machine Type | CNC Knee Mill (KMX control) | CNC Knee Mill (RMX control) |
| Table Size (W × L) | 10″ × 50″ | 10″ × 50″ |
| T‑Slots | 3 × 0.625″ × 3″ | 3 × 0.625″ × 3″ |
| X‑Axis Table Travel | 32″ | 32″ |
| Y‑Axis Saddle Travel | 16″ | 16″ |
| Z‑Axis Knee Travel | 16″ | 16″ |
| Maximum Quill Travel | 5″ | 5″ |
| Spindle Taper | R8 | R8 |
| Spindle Speed Range (RPM) | 60–500 / 600–4,200 | 40–600 / 300–5,000 |
| Spindle Motor Power | 3 hp | 3 hp |
| Control Type | ProtoTRAK KMX CNC | ProtoTRAK RMX CNC |
| Maximum Workpiece Weight on Table | 850 lbs | 850 lbs |
| Machine Weight (Approx) | ~2,300 lbs | ~2,816 lbs |
| Dimensions (L × W × H) | 78″ × 103″ × 87″ | 78″ × 103″ × 92″ |
| Head Tilt & Swivel | 45° forward/back, 90° left/right | 45° forward/back, 90° left/right |
